I used a heat tool - or heat pen it is sometimes called. I had purchased some stencil blanks and spent a long hour pushing that tool through the stencil material. Yikes. It was thick and gummed up the tool tip and kept leaving threads of plastic attached to the corners where I had cut. Frustrating to say the least. But I did manage to cut out a flower shape and was quite pleased with the outcome. On my second attempt I used a more complicated design and didn't even get a quarter of the way through - it was not worth the frustration.
On Instagram I got the suggestion to use plastic folders for the stencil material and I remembered I had a pad of acetate hanging around. The acetate is much easier to glide the heat pen through and away I went!!
I used a glass cutting board that I found cheap at the thrift store. I taped my design underneath the glass and taped the acetate to the top of the glass. I find it's easier to pull the tool towards you rather than away from you. It is also easier for me to do lines all running in the same direction to get a flow going - then flip the cutting board around and do another direction.
A quick test with some spray inks -
And then spray inks on to a wood panel over top of some collage. I blended the spray inks with some white acrylic and some watered down self leveling gel. Now the panel is ready for some Mandala drawing.
Have you made your own stencils? Try it - it's easy peasy once you get the hang of it!
